Module meshtastic.supported_device

""" Supported Meshtastic Devices - This is a class and collection of Meshtastic devices.
    It is used for auto detection as to which device might be connected.
"""
# pylint: disable=R0917

# Goal is to detect which device and port to use from the supported devices
# without installing any libraries that are not currently in the python meshtastic library


class SupportedDevice:
    """Devices supported on Meshtastic"""

    def __init__(
        self,
        name,
        version=None,
        for_firmware=None,
        device_class="esp32",
        baseport_on_linux=None,
        baseport_on_mac=None,
        baseport_on_windows="COM",
        usb_vendor_id_in_hex=None,
        usb_product_id_in_hex=None,
    ):
        """constructor"""
        self.name = name
        self.version = version
        self.for_firmware = for_firmware
        self.device_class = device_class  # could be "nrf52"

        # when you run "lsusb -d xxxx:" in linux
        self.usb_vendor_id_in_hex = usb_vendor_id_in_hex  # store in lower case
        self.usb_product_id_in_hex = usb_product_id_in_hex  # store in lower case

        self.baseport_on_linux = baseport_on_linux  # ex: ttyUSB or ttyACM
        self.baseport_on_mac = baseport_on_mac
        self.baseport_on_windows = baseport_on_windows


# supported devices
tbeam_v0_7 = SupportedDevice(
    name="T-Beam",
    version="0.7",
    for_firmware="tbeam0.7",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)
tbeam_v1_1 = SupportedDevice(
    name="T-Beam",
    version="1.1",
    for_firmware="tbeam",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)
tbeam_M8N = SupportedDevice(
    name="T-Beam",
    version="M8N",
    for_firmware="tbeam",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)
tbeam_M8N_SX1262 = SupportedDevice(
    name="T-Beam",
    version="M8N_SX1262",
    for_firmware="tbeam",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)
tlora_v1 = SupportedDevice(
    name="T-Lora",
    version="1",
    for_firmware="tlora-v1",
    baseport_on_linux="ttyUSB",
    baseport_on_mac="cu.usbserial",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)
tlora_v1_3 = SupportedDevice(
    name="T-Lora",
    version="1.3",
    for_firmware="tlora-v1-3",
    baseport_on_linux="ttyUSB",
    baseport_on_mac="cu.usbserial",
    usb_vendor_id_in_hex="10c4",
    usb_product_id_in_hex="ea60",
)
tlora_v2 = SupportedDevice(
    name="T-Lora",
    version="2",
    for_firmware="tlora-v2",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)
tlora_v2_1_1_6 = SupportedDevice(
    name="T-Lora",
    version="2.1-1.6",
    for_firmware="tlora-v2-1-1.6",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)
heltec_v1 = SupportedDevice(
    name="Heltec",
    version="1",
    for_firmware="heltec-v1",
    baseport_on_linux="ttyUSB",
    baseport_on_mac="cu.usbserial-",
    usb_vendor_id_in_hex="10c4",
    usb_product_id_in_hex="ea60",
)
heltec_v2_0 = SupportedDevice(
    name="Heltec",
    version="2.0",
    for_firmware="heltec-v2.0",
    baseport_on_linux="ttyUSB",
    baseport_on_mac="cu.usbserial-",
    usb_vendor_id_in_hex="10c4",
    usb_product_id_in_hex="ea60",
)
heltec_v2_1 = SupportedDevice(
    name="Heltec",
    version="2.1",
    for_firmware="heltec-v2.1",
    baseport_on_linux="ttyUSB",
    baseport_on_mac="cu.usbserial-",
    usb_vendor_id_in_hex="10c4",
    usb_product_id_in_hex="ea60",
)
rak11200 = SupportedDevice(
    name="RAK 11200",
    version="",
    for_firmware="rak11200",
    baseport_on_linux="ttyUSB",
    baseport_on_mac="cu.usbserial-",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="7523",
)
meshtastic_diy_v1 = SupportedDevice(
    name="Meshtastic DIY",
    version="1",
    for_firmware="meshtastic-diy-v1",
    baseport_on_linux="ttyUSB",
    baseport_on_mac="cu.usbserial-",
    usb_vendor_id_in_hex="10c4",
    usb_product_id_in_hex="ea60",
)
# Note: The T-Echo reports product id in boot mode
techo_1 = SupportedDevice(
    name="T-Echo",
    version="1",
    for_firmware="t-echo-1",
    device_class="nrf52",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="239a",
    usb_product_id_in_hex="0029",
)
rak4631_5005 = SupportedDevice(
    name="RAK 4631 5005",
    version="",
    for_firmware="rak4631_5005",
    device_class="nrf52",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="239a",
    usb_product_id_in_hex="0029",
)
rak4631_5005_epaper = SupportedDevice(
    name="RAK 4631 5005 14000 epaper",
    version="",
    for_firmware="rak4631_5005_epaper",
    device_class="nrf52",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="239a",
    usb_product_id_in_hex="0029",
)
# Note: The 19003 reports same product id as 5005 in boot mode
rak4631_19003 = SupportedDevice(
    name="RAK 4631 19003",
    version="",
    for_firmware="rak4631_19003",
    device_class="nrf52",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="239a",
    usb_product_id_in_hex="8029",
)
nano_g1 = SupportedDevice(
    name="Nano G1",
    version="",
    for_firmware="nano-g1",
    baseport_on_linux="ttyACM",
    baseport_on_mac="cu.usbmodem",
    usb_vendor_id_in_hex="1a86",
    usb_product_id_in_hex="55d4",
)

supported_devices = [
    tbeam_v0_7,
    tbeam_v1_1,
    tbeam_M8N,
    tbeam_M8N_SX1262,
    tlora_v1,
    tlora_v1_3,
    tlora_v2,
    tlora_v2_1_1_6,
    heltec_v1,
    heltec_v2_0,
    heltec_v2_1,
    meshtastic_diy_v1,
    techo_1,
    rak4631_5005,
    rak4631_5005_epaper,
    rak4631_19003,
    rak11200,
    nano_g1,
]